Membrane Washing Systems
Calcium that occurs on membranes, mushrooms, polymers, silica, sand, and contaminants is a result of clogging the pores on the membrane surface. Therefore, the membranes and membrane systems are used to wash water again and to open the purification process.
■ The membrane washing system is designed to be controlled manually with the panel on the chassis.
■ The chemical storage tank is mounted on the chassis.
■ Connected with PVC pipe and fittings.
■ All wiring and piping before shipment is completed in our factory, tested and shipped.
■ SS316 Washing pump
■ Working pressure 3 bar
■ 380V / 3Ph / 50Hz
■ SS304 body with 5 micron PP cartridge Filter
■ Covered PP chemical solution tank
■ PVC tubing SCH 80 and ball valves
■ Inline flowmeters and Manometers
■ All equipment is on SS304 chassis.
■ pH Controller
■ Electric heater
■ Temperature controller
■ Frame motion wheels
The Membrane Wash Chemicals
The most common acid in cleaning water using chemicals that are used for membrane-based cleaning process.
Designed by LG Chem for domestic water treatment, NanoH2O ™ reverse osmosis membranes are manufactured with advanced thin-film nano-composite membrane technology to safely and efficiently refine water in your home.
Home Reverse Osmosis (RO) Membrane LG TWRO-1812 / LG TWRO-2012
■ 80 GPD CAPACITY
■ SUPERIOR QUALITY
■ HIGH EXPENDITURE EFFICIENCY
■ HIGH PRODUCT WATER CAPACITY
■ These membranes are NSF-certified and deliver reliability and quality to customers across the globe as expected from the LG Chem brand.
■ All of the LG TWRO domestic RO membranes are standard features and easily adapt to any domestic RO system.
■ Max. Working Pressure 10 bar (150 psig)
■ Max. Working Temperature 45 ° C (113 ° F)
■ Max. Feed Drain 7.6 lpm (2.0 gpm)
■ pH Range, Continuous 2-11
■ Max. Feeding Skin Density Index (SDI) 5
■ Free Chlorine Tolerance
Jammy Domestic Reverse Osmosis Membranes
Instructions for Use:
■ For first use, the filled tank must be drained. Do not use the first obtained water for drinking.
■ Always keep the membranes moist after the first wet, do not allow to dry.
■ If the operating conditions and guidelines in this product information bulletin are not strictly observed, the limited warranty will also be void.
■ Membrane elements must be immersed in the preservative solution to prevent biological growth when the system is not to be operated for a long period of time.
■ Rinse the guard thoroughly before use.
■ The end user is completely responsible for the effects of unsuitable chemicals and oils on the elements. In this way, inappropriate chemical and oil usage will invalidate the limited warranty.
■ Membrane Type: Polyamide Fine-Film Composite
■ Maximum Operating Temperature: 113o F / 45o C
■ Maximum Operating Pressure: 300 psi (21 bar)
■ pH range, continuous operation: 2-11
■ pH range, short-time wash (30 min): 1-12
■ Maximum feed water silt density index (SDI): 5
■ Free Chloride: <0.1ppm
|Brand||Model||Membrane Type||Membrane Diameter||Membrane Size||Membran Capacity (gpd)||İyon Removal|
|HYDRANAUTICS||ESPA 1 4040||Low Pressure Membranes||4″||40″||2600||%99,3|
|HYDRANAUTICS||ESPA 2 4040||Low Pressure Membranes||4″||40″||1900||%99,6|
|HYDRANAUTICS||ESPA 2 4040SWC 5 4040||Sea Water Membranes||4″||40″||1900||%99,7|
|HYDRANAUTICS||ESPA 1||Low Pressure Membranes||8″||40″||12000||%99,3|
|HYDRANAUTICS||ESPA 2||Low Pressure Membranes||8″||40″||9000||%99,6|
|HYDRANAUTICS||ESPA 2 MAX||Low Pressure Membranes||8″||40″||12000||%99,6|
|HYDRANAUTICS||ESPA 2 LD||Low Pressure Membranes||8″||40″||10000||%99,6|
|HYDRANAUTICS||CPA 2||High Pressure Membranes||8″||40″||10000||%99,7|
|HYDRANAUTICS||CPA 3||High Pressure Membranes||8″||40″||11000||%99,7|
|HYDRANAUTICS||SWC 5||Sea Water Membranes||8″||40″||9000||%99,8|
|HYDRANAUTICS||SWC 5 MAX||Sea Water Membranes||8″||40″||9900||%99,8|
|FILMTECH||LCHR 4040||High Pressure Membranes||4″||40″||2900||%99,7|
|FILMTECH||LP 4040||Low Pressure Membranes||4″||40″||2900||%99,2|
|FILMTECH||SW30 4040||Sea Water Membranes||4″||40″||1950||%99,4|
|FILMTECH||BW30HR 440i||High Pressure Membranes||8″||40″||12650||%99,7|
|FILMTECH||HRLE 440i||Low Pressure Membranes||8″||40″||12650||%99,5|
|FILMTECH||SW30 XHR 4440i||Sea Water Membranes||8″||40″||6600||%99,7|
|FILMTECH||SW30 HRLE 400i||Sea Water Membranes||8″||40″||7500||%99,8|