Membrane Washing Systems


kimyasal-yikama-cip-membranlar-su-aritim-sistemleriCalcium that occurs on membranes, mushrooms, polymers, silica, sand, and contaminants is a result of clogging the pores on the membrane surface. Therefore, the membranes and membrane systems are used to wash water again and to open the purification process.

■ The membrane washing system is designed to be controlled manually with the panel on the chassis.
■ The chemical storage tank is mounted on the chassis.
■ Connected with PVC pipe and fittings.
■ All wiring and piping before shipment is completed in our factory, tested and shipped.
■ SS316 Washing pump
■ Working pressure 3 bar
■ 380V / 3Ph / 50Hz
■ SS304 body with 5 micron PP cartridge Filter
■ Covered PP chemical solution tank
■ PVC tubing SCH 80 and ball valves
■ Inline flowmeters and Manometers
■ All equipment is on SS304 chassis.

OPTIONAL CHARACTERISTICS
■ pH Controller
■ Electric heater
■ Temperature controller
■ Frame motion wheels
■ Mixer

The Membrane Wash Chemicals
The most common acid in cleaning water using chemicals that are used for membrane-based cleaning process.

40×40 Membrane & 80×80 Membrane & Pressure Vessel


NanoH2O™ Membranes


aquachem-nano-h20-membranlari-evsel-ters-osmoz-mebrani
Designed by LG Chem for domestic water treatment, NanoH2O ™ reverse osmosis membranes are manufactured with advanced thin-film nano-composite membrane technology to safely and efficiently refine water in your home.
Home Reverse Osmosis (RO) Membrane LG TWRO-1812 / LG TWRO-2012
■ 80 GPD CAPACITY
■ SUPERIOR QUALITY
■ HIGH EXPENDITURE EFFICIENCY
■ HIGH PRODUCT WATER CAPACITY
■ These membranes are NSF-certified and deliver reliability and quality to customers across the globe as expected from the LG Chem brand.
■ All of the LG TWRO domestic RO membranes are standard features and easily adapt to any domestic RO system.
Work Features
■ Max. Working Pressure 10 bar (150 psig)
■ Max. Working Temperature 45 ° C (113 ° F)
■ Max. Feed Drain 7.6 lpm (2.0 gpm)
■ pH Range, Continuous 2-11
■ Max. Feeding Skin Density Index (SDI) 5
■ Free Chlorine Tolerance

Jammy Domestic Reverse Osmosis Membranes


jammy-evsel-ters-ozmoz-membranlari-antalya-su-aritimiMembranes produced in accordance with drinking water treatment reverse osmosis (RO) are the most reliable and affordable products in the industry.

Instructions for Use:
■ For first use, the filled tank must be drained. Do not use the first obtained water for drinking.
■ Always keep the membranes moist after the first wet, do not allow to dry.
■ If the operating conditions and guidelines in this product information bulletin are not strictly observed, the limited warranty will also be void.
■ Membrane elements must be immersed in the preservative solution to prevent biological growth when the system is not to be operated for a long period of time.
■ Rinse the guard thoroughly before use.
■ The end user is completely responsible for the effects of unsuitable chemicals and oils on the elements. In this way, inappropriate chemical and oil usage will invalidate the limited warranty.

Working conditions:
■ Membrane Type: Polyamide Fine-Film Composite
■ Maximum Operating Temperature: 113o F / 45o C
■ Maximum Operating Pressure: 300 psi (21 bar)
■ pH range, continuous operation: 2-11
■ pH range, short-time wash (30 min): 1-12
■ Maximum feed water silt density index (SDI): 5
■ Free Chloride: <0.1ppm


Brand Model Membrane Type Membrane Diameter Membrane Size Membran Capacity (gpd) İyon Removal
HYDRANAUTICS ESPA 1 4040 Low Pressure Membranes 4″ 40″ 2600 %99,3
HYDRANAUTICS ESPA 2 4040 Low Pressure Membranes 4″ 40″ 1900 %99,6
HYDRANAUTICS ESPA 2 4040SWC 5 4040 Sea Water Membranes 4″ 40″ 1900 %99,7
HYDRANAUTICS ESPA 1 Low Pressure Membranes 8″ 40″ 12000 %99,3
HYDRANAUTICS ESPA 2 Low Pressure Membranes 8″ 40″ 9000 %99,6
HYDRANAUTICS ESPA 2 MAX Low Pressure Membranes 8″ 40″ 12000 %99,6
HYDRANAUTICS ESPA 2 LD Low Pressure Membranes 8″ 40″ 10000 %99,6
HYDRANAUTICS CPA 2 High Pressure Membranes 8″ 40″ 10000 %99,7
HYDRANAUTICS CPA 3 High Pressure Membranes 8″ 40″ 11000 %99,7
HYDRANAUTICS SWC 5 Sea Water Membranes 8″ 40″ 9000 %99,8
HYDRANAUTICS SWC 5 MAX Sea Water Membranes 8″ 40″ 9900 %99,8
FILMTECH LCHR 4040 High Pressure Membranes 4″ 40″ 2900 %99,7
FILMTECH LP 4040 Low Pressure Membranes 4″ 40″ 2900 %99,2
FILMTECH SW30 4040 Sea Water Membranes 4″ 40″ 1950 %99,4
FILMTECH BW30HR 440i High Pressure Membranes 8″ 40″ 12650 %99,7
FILMTECH HRLE 440i Low Pressure Membranes 8″ 40″ 12650 %99,5
FILMTECH SW30 XHR 4440i Sea Water Membranes 8″ 40″ 6600 %99,7
FILMTECH SW30 HRLE 400i Sea Water Membranes 8″ 40″ 7500 %99,8